Directory configs/lathe-pluto/

Lines of Code

Developers

Most Recent Commits

cradek 2007-07-19 16:12

fix the many other varfiles (UVW)

34 lines of code changed in:

• configs/lathe-pluto: emc.var (+34)

cradek 2007-06-16 12:24

update config - as run at cnc workshop 2007

85 lines of code changed in:

• configs/lathe-pluto: lathe-pluto.hal (+68 -79), lathe-pluto.ini (+17 -11), postgui.hal (new), vcp.xml (new)

cradek 2007-05-16 17:57

oops

3 lines of code changed in:

• configs/lathe-pluto: lathe-pluto.ini (+3 -3)

cradek 2007-05-16 17:49

new power supply etc., scaling and tuning updates

34 lines of code changed in:

• configs/lathe-pluto: lathe-pluto.hal (+7 -4), lathe-pluto.ini (+27 -25)

alex_joni 2007-05-12 14:46

replace linkpp with net. linkpp is obsolete

3 lines of code changed in:

• configs/lathe-pluto: lathe-pluto.hal (+3 -3)

cradek 2007-05-10 18:26

looks like some names changed

7 lines of code changed in:

• configs/lathe-pluto: lathe-pluto.hal (+7 -7)

jmkasunich 2007-05-05 16:47

change motmod insmod parameter from max_joints to num_joints

1 lines of code changed in:

• configs/lathe-pluto: lathe-pluto.hal (+1 -1)

alex_joni 2007-02-24 18:30

Added max_joints insmod parameter for the motmod module.
Changed a couple of places in the motion controller to check only
up to EMCMOT_MAX_JOINTS(=max_joints), should improve speed a tiny bit.
This also helps to export only the needed number of joints from the motion controller.
HAL files use 'loadrt motmod .. max_joints=[TRAJ]AXES' for now

1 lines of code changed in:

• configs/lathe-pluto: lathe-pluto.hal (+1 -1)

jmkasunich 2007-01-28 17:37

don't need to load scope_rt or halscope by default, they can now be loaded from the GUI menus

0 lines of code changed in:

• configs/lathe-pluto: lathe-pluto.hal (-2)

jmkasunich 2007-01-27 22:28

fix lathe spindle sync signals

4 lines of code changed in:

• configs/lathe-pluto: lathe-pluto.hal (+4 -10)

alex_joni 2007-01-26 13:02

get rid of double values for INPUT/OUTPUT_SCALE as they are not needed/used. HAL only takes one value, and emc doesn't read the seconds param

6 lines of code changed in:

• configs/lathe-pluto: lathe-pluto.ini (+6 -6)

alex_joni 2007-01-23 12:55

ignore copied emc.nml

1 lines of code changed in:

• configs/lathe-pluto: .cvsignore (new 1)

alex_joni 2007-01-22 16:14

beautify configs as on the 2.1 branch

3 lines of code changed in:

• configs/lathe-pluto: lathe-pluto.ini (+3 -3)

cradek 2007-01-14 19:17

description

0 lines of code changed in:

• configs/lathe-pluto: README (new)

cradek 2007-01-09 10:24

Sample configuration for servo lathe using pluto controller for
encoder counting and pwm generation. Threading is supported,
one home/limit switch on X.

109 lines of code changed in:

• configs/lathe-pluto: emc.tbl (new), emc.var (new), lathe-pluto.hal (new 84), lathe-pluto.ini (new 25)