Directory configs/sim/

Lines of Code

Developers

Most Recent Commits

jmkasunich 2007-08-04 15:01

fix incremental jog increments

2 lines of code changed in:

• configs/sim: axis.ini (+2 -2)

jepler 2007-07-23 15:19

get rid of mentions of bridgeporttask and minimilltask

20 lines of code changed in:

• configs/sim: axis.ini (+2 -2), axis_9axis.ini (+2 -2), axis_mm.ini (+2 -2), keystick.ini (+2 -2), lathe.ini (+2 -2), mini.ini (+2 -2), servo_sim.ini (+2 -2), tkemc.ini (+2 -2), tripod.ini (+2 -2), xemc.ini (+2 -2)

cradek 2007-07-19 16:13

fix the many other varfiles (UVW)

2 lines of code changed in:

• configs/sim: servo_sim.ini (+2 -2)

cradek 2007-07-14 17:43

merge nineaxis branch (UVW changes)

426 lines of code changed in:

• configs/sim: .cvsignore (+2), axis.ini (+2 -3), axis_9axis.ini (new 339), axis_mm.ini (+1 -2), keystick.ini (+1 -2), lathe.ini (+3 -27), mini.ini (+1 -2), position_mm.txt (+4 -3), servo_sim.ini (+2 -3), sim.var (+34), sim_mm.var (+34), tkemc.ini (+1 -2), tripod.ini (+1 -2), xemc.ini (+1 -2)

jmkasunich 2007-07-09 22:33

add screw error compensation to servo_sim sample config

4 lines of code changed in:

• configs/sim: screwcompX.dat (new), servo_sim.ini (+4 -2)

jepler 2007-06-12 00:22

change g95 (feed per rev) to be based on spindle velocity instead of spindle position. this should make g95 behave better as the number of spindle revs gets large, make g95 behave better with 1PPR-type spindle feedback, and make implementing g95 based on loopback spindle speed easier.

1 lines of code changed in:

• configs/sim: lathe.hal (+1 -1)

jepler 2007-06-11 20:32

add newline expected by rs274 sai

1 lines of code changed in:

• configs/sim: sim.tbl (+1)

cradek 2007-05-30 10:46

mm sim setup

6 lines of code changed in:

• configs/sim: axis_mm.ini (new 3), position_mm.txt (new 3), sim_mm.tbl (new), sim_mm.var (new)

jmkasunich 2007-05-23 10:37

core-sim only supports three axis, so simulated-home can't do four

9 lines of code changed in:

• configs/sim: simulated_home.hal (+9 -9)

jarl.stefansson 2007-05-19 07:22

New Plasma Configuration to replace dallur-thc config and a standalone simulator config, gantrykins kinematics, optional default values added to pyvcp components, changed parameters to pins in comp and oneshot

13 lines of code changed in:

• configs/sim: sim-xyyz.hal (new), simulated_home.hal (+13)

alex_joni 2007-05-12 14:46

replace linkpp with net. linkpp is obsolete

12 lines of code changed in:

• configs/sim: axis.ini (+4 -1), servo_sim.hal (+3 -3), sim.tbl (+2 -1), tripodsim.hal (+3 -3)

jmkasunich 2007-05-05 16:47

change motmod insmod parameter from max_joints to num_joints

1 lines of code changed in:

• configs/sim: servo_sim.hal (+1 -1)

cradek 2007-05-03 19:55

ignore

1 lines of code changed in:

• configs/sim: .cvsignore (+1)

cradek 2007-04-02 22:50

support for starting a user-configurable editor on the loaded program or tool table

3 lines of code changed in:

• configs/sim: axis.ini (+3 -1)

jepler 2007-03-20 10:13

use the INCREMENTS feature to set available jog increments

2 lines of code changed in:

• configs/sim: axis.ini (+2 -1)

alex_joni 2007-02-24 18:30

Added max_joints insmod parameter for the motmod module.
Changed a couple of places in the motion controller to check only
up to EMCMOT_MAX_JOINTS(=max_joints), should improve speed a tiny bit.
This also helps to export only the needed number of joints from the motion controller.
HAL files use 'loadrt motmod .. max_joints=[TRAJ]AXES' for now

1 lines of code changed in:

• configs/sim: servo_sim.hal (+1 -1)

cradek 2007-02-13 23:39

fix wildly wrong comments

1 lines of code changed in:

• configs/sim: check_constraints.hal (+1 -7)

jepler 2007-02-08 22:35

fix demo to work with pyvcp changes

3 lines of code changed in:

• configs/sim: pyvcp_demo.hal (+3 -2)

cradek 2007-02-03 20:33

ignore position files

2 lines of code changed in:

• configs/sim: .cvsignore (+2)

jmkasunich 2007-01-28 17:37

don't need to load scope_rt or halscope by default, they can now be loaded from the GUI menus

0 lines of code changed in:

• configs/sim: servo_sim.hal (-5), tripodsim.hal (-5)

(77 more)